Recent content by 99RRdifflock

  1. 9

    E-Locker Actuator

    then i dont have enough room to get them to clear the motor because the sway bar stabilizer is in the way - unless that does need to be removed? Trust me I tried to finaangle it on with the bolts installed. Thanks guys - I will post pics later today. Again, thanks
  2. 9

    E-Locker Actuator

    then how do i get them to "bottom out". I tried the two nut trick but there isnt enough room when they are "bottomed" to crack the second nut and get them both off to re-attach with a washer?
  3. 9

    E-Locker Actuator

    Hey Anybody, Another question for those who have done this..... The retaining bolts for the Actuator - the double threaded ones....Do they have a bottom? ie. do they bottom out in the differential housing or are they held on with backwards pressure from the attaching nut (if that makes sense)...
  4. 9

    E-Locker Actuator

    Got it in! Works 100 %. For anybody that searches this thread for question in the future a few notes: 1) The retaining bolts need to come completely out to line it up and get it ON. 2) The lower retaining bolt is open (?) to the differential, so it will leak oil when you remove it. I did not...
  5. 9

    E-Locker Actuator

    Might be a dumb question. Should I put POR-15 on the actuator side surface before mating them? Might help prevent some of the oxidation? I cleaned up the differential side and put POR-15 on that side.
  6. 9

    E-Locker Actuator

    I bought the AISIN SAT-008 from Amazon for 400 ish bucks shipped will arrive tomorrow.
  7. 9

    E-Locker Actuator

    To clarify - when I get the part I install it in the LOCKED position, right?
  8. 9

    E-Locker Actuator

    Just moved the locker pin manually. Yes! The light is solid with rrdifflock. So I ordered SAT-008. Now I’m going to clean the mating surface and paint with POR-15 in the rusty crap around there. Fingers crossed, will update.
  9. 9

    E-Locker Actuator

    Hey All, First Post, I have tried to search with not a lot of luck. I have a 1999 4Runner (why I am in the forum). My Actuator is toast. Corroded and the cast is cracked. I need a replacement, but cannot find information on which AISIN part to buy? SAT-008 - Shows a fitment for 1995-2015...
Back
Top Bottom