Recent content by 79er

  1. 7

    79 tail lights

    I may be able to do that. thanks
  2. 7

    79 tail lights

    Here is my thought process before I begin cutting and splicing wires. I'm restoring a 79, I have new in the box factory Toyota tail lights for a 78. I have both male/female connectors for a 79. Im thinking I can splice a 79 connector to the 78 wires on that tail light. only issue I see is I may...
  3. 7

    Stainless brake hoses

    Thanks all for the help! I'm going to give Marks a shout
  4. 7

    Stainless brake hoses

    Anyone have any experience with Specter's stainless brake hoses? Looking for stainless and a bit longer than stock.
  5. 7

    79 40x brake calipers

    Looking for source for front brake calipers for 79 40x mine are trashed and not rebuildable.
  6. 7

    Brake lines

    I'll go with the SUR&R, thanks
  7. 7

    Brake lines

    Getting ready to install brake lines on my 79 fj40 rolling chassis. Have 3/16 cunifer line and looking for suggestions on brake line flare nuts. Upon disassembly appears that fittings require double flare and the nuts I took off are 10x1.0 inverted flare / double with non threaded end. Having...
  8. 7

    Dobinsons rear leaf spring install

    I have not placed the body on the frame yet, only the axle,. We will see how this looks once the weight of the body compresses the springs. It will be some time. I still have ot of work to do on the chassis yet.
  9. 7

    Dobinsons rear leaf spring install

    Emailed Dobinsons with pics. and they replied that once loaded and shocks installed the shackles will be in correct position. Im not picturing it but will try it.
  10. 7

    Dobinsons rear leaf spring install

    They are marked front/ rear
  11. 7

    Dobinsons rear leaf spring install

    That would be helpful, mine is a Sept 79, the fronts appear fine, the fixed end is attached
  12. 7

    Dobinsons rear leaf spring install

    79 FJ40, installing dobinsons rear springs toy-34, rear shackle appears too far inboard upon test fit. There is no load in the spring yet. Wondering if this will correct when load applied or go further inboard ? Attached pics. Any ideas?
  13. 7

    pinion preload

    thanks. Do the axles have to be removed?
  14. 7

    pinion preload

    Replacing pinion seals in 79 FJ40. Inspected bearings and races and look good. Shim style without crush sleeve. My question is can I set pinion preload with axles in or must they be out? Also what would be appropriate preload with old bearings and races? I have already replaced seals and have...
Back
Top Bottom