Recent content by 4byfour

You won't have to loosen all the fuel lines (or the mounting nuts/stay bolt) to check your timing as you don't need to rotate the pump - only the crankshaft. You may need to create room to get the plunger tool in place by disconnecting one line. Like many things, what may seem complicated isn't...

Yes it does. EM-23 to EM-26 in my 1990 engine manual anyway. Cheers

Duplicate

I need to know numbers. Ive had my pump off several times, with the SST and a good gauge the subtleties of rotating the pump the smallest amount become obvious. After pump and engine rebuild I opted towards advanced, and got lucky with my pre-running choice and only with the tool do you have an...

Thought I would add back after a long hiatus that I used my rebuilt 1990 injectors with the newer pistons from Engines Australia and the thicker injector washers. 8000 km and nothing but sweet! Cheers

Sorry for wasting anybodys time - with more time to assess, it is, of course, to the starter motor ffs. That mess of wiring plugs is so tight in there and hard to get into, just missed the female plug tucked underneath starter once it was off the hoist. What a job its been.

Hi folks, I have reinstalled engine into my 1990 Hdj81 and have an orphaned single wire (red/black) male plug. It comes off the main harness, short lead down by the rest of the connectors near engine oil dipstick. Its been 1.5 years since I pulled the engine and having no recollection of this...

Still on my to do list - so I never solved my cruise control issue yet. Will try to update here once my truck is running again. Cheers

Thanks fellas

Hi folks, In my Toyota gasket kit 04111-17020 I have a ~78 mm aluminum crush gasket that has a mint green coating on either side. Its been a year since my 1HDT teardown and I don't recall encountering this part. Anybody know what it is for? Cheers

Thats great to know @Outono ! Thanks very much for adding this info. This will help alot of us who are in the situation with rebuilds, and further confirms what others have indicated for use of later pistons. Informed decisions - thats why this forum is such a great resource. Cheers

Also hitting up this old thread lest somebody might have updates on this topic. Can anyone using the later pistons (bigger bowl) with their pre-1992 injectors and pump follow up on longer-term outcomes of making the switch (with the later, thicker injector seats). I need to make the choice. I...

I have a wiring harness for towing, but i have never used it. So, when you used your turn signal it cancelled cruise, but did it throw the flashing error or were you able to reset without restarting the engine? Thats interesting @Dork, I hadnt considered towing wiring as a possible source for...

Thanks @Turbobrick211 - thats interesting. I've thought the brake signal isnt involved cause of the flashing error code but who knows. For a period of time mine would set then after a short while (like 5 mins) just kick off with the flasing error. Then lately it wouldn't set at all. At some...

While this thread is inactive, I'm sure others will continue searching for info on the cruise control. I don't have solution, but I have the exact same symptoms as described by Andrew. I changed the speed control sensor to no avail. Still hoping some else may have identified this problem and...