Recent content by 1hznewcomer

  1. 1hznewcomer

    Body wobble at high speed? Short story

    closure for this post - wheels were off balance by shop that fitted new rubber. took back an explained process of rotating tires to confirm wheels off balance. rebalanced and no issues.
  2. 1hznewcomer

    Seeking answer - Roof Load Capacity for HZJ80

    Search as I may, I can't find a clear-cut answer. What is the roof load capacity for the noble steed? I have found reference to the 100 series roof rated to 200kg, however I see this number is being thrown around without much certainty. Specifically looking for load rating for full length gutter...
  3. 1hznewcomer

    Body wobble at high speed? Short story

    Update! Checked bearings - jacked up all tyres and felt for play, all solid. Rotated tyres, front passenger to rear driver and vice versa. All tyres have vastly different weights for balance, just an observation. Test dive at 90km for a few kms, issue seems to have faded greatly. The road...
  4. 1hznewcomer

    Body wobble at high speed? Short story

    Thanks for the reply, I’ll check the bearings then rotate. See if I can narrow it down. I agree about taking it back to the mechanic, I’m sorta new to town here so still learning who’s good with the tools. Definitely love the QLD north coastline, brilliant fishing too. Spent many months in...
  5. 1hznewcomer

    Body wobble at high speed? Short story

    Hey Mudders, got a lil gremlin I’ve been chasing and could use the hive mind input 80 series on 33’ muds, been working my way though some steering wobble issues. Initially a very bad steering shake, after replacing all tyres and a worn tie rod end, the shake still existed but was far less...
  6. 1hznewcomer

    HZJ80R high pressure power steering hose replacement options?

    Bit late to the party but going to post for future users. I had this exact issue, slow leaks from both high and low pressure hose from steering box. Elite Mechanical in Townsville, QLD AUS got on the job. I paid $850 au for them to remove both hoses, run them to a hose shop to be replaced with...
  7. 1hznewcomer

    Knock from front prop shaft/yoke?

    Just following up on this post. Got the 80 repaired with rampt customs kit. Kit was $150, labor at my local mechanic came to $660. Going to test it all out this weekend. Happy days!
  8. 1hznewcomer

    Knock from front prop shaft/yoke?

    Appreciate all the advice, it's been very helpful 🙏
  9. 1hznewcomer

    Knock from front prop shaft/yoke?

    Big question, how dangerous is it to continue driving with occasional off road work (mostly sand driving) in this condition? I live permanently on the road, so will need to use this as my daily until i can get it into a shop. Likely in a months time.
  10. 1hznewcomer

    Knock from front prop shaft/yoke?

    I have found some great reviews of a bloke in the next state, he makes plates specifically for this. I'll add a link below. Reading through previous forums it sounds like an 8 - 10hr job to get a shop to do it. Disassemble and reassemble taking the majority of time... at a guess, id say this...
  11. 1hznewcomer

    Knock from front prop shaft/yoke?

    looks like I've found the culprit. And there's additional fractures to the chassis rail. Bought this rig 3 weeks ago, the things you find once you start looking 🙄 Anyone recommend a decent welder in QLD Australia?
  12. 1hznewcomer

    Knock from front prop shaft/yoke?

    Damn, you nailed it mate. Went in with some degreaser and a brush to triple check. Found a fracture identical to the one you have posted. Ill take a pic an upload soon. For the remedy, just take it to a welder and patch it back together? No need to disassemble anything from what I can tell?
  13. 1hznewcomer

    Knock from front prop shaft/yoke?

    That is correct, manual locking hubs. Yeah noise has occurred once driving over a gutter. I'll get it out and go from there, cheers nemesis Ahh lists. I love lists. Steering box has already been welded and new bushings in sway bar. I'll have a look at the radius arm bolts and see if there's any...
  14. 1hznewcomer

    Knock from front prop shaft/yoke?

    Yep, G'day from Aus. Its 4WD, transfer case runs 2H, N, 4H, 4L. I think I'll follow your train of thought and just remove the front shaft and go for a drive. If the noise persists I will have at least eliminated one suspect. And if not, I'll have the shaft out ready for a rebuild. Thanks for the...
  15. 1hznewcomer

    Knock from front prop shaft/yoke?

    Apologies for my ignorance but I don't fully comprehend. There is no CDL switch, and rear is LSD. So I'm assuming I would need to shift to 4 low range for centre to lock? So remove front drive shaft, go 4 low, flex front and see if noise has disappeared? Additional info, 1991 1hz.
Back
Top Bottom