Parting out 80-series/LX450 80 series / lx450 all years

Pm sent.

Gotcha, thanks @Frisman let me know which year your cruiser is and I'll check stock

What center console is in there? Tall or short?

Hi Scott I assume by tall you mean the console with the cushion and by short ypu mean the hard plastic? As it turns out I likely have both — depending on the color you are after? Message me and we can sort it out.

~Ash

Hey brother, I'm sure I'm the only guy looking for a couple of locking third members (lol). I don't care of the actuator is working or not ... in fact I'd prefer it isn't because I want to put it in my '40 housings front and rear and do a DIY cable conversion so I'd rather not pay for an actuator I won't even use anyway. Of course, I'm sitting here and I can't remember if the 80 series had 9.5 diffs in the front or not. Anyway, I'm a few months away from having the budget for them but I just found your post and thought I'd throw ya a line to see what you have. I really don't want to go a lot wider than my stock axles ... unless I go with something like 5 inches of backspacing on my wheels ... hmmm. I'm going to be linked and using 17-inch wheels, so frame rubbing with my 37's is my only concern. For the front I'm going to just throw the thing in upside down. I don't think it'll be too bad since I don't plan on doing any high speed driving in 4-high and I can run some super slick stuff in there to protect the teeth ... or maybe just get some that are hardened for high pinion diffs?? then I just have to worry about pinion bearing lubrication and I've seen lots of different solutions for that. One is to just pack them with bearing grease.

Thanks! I live in SE Idaho so it wouldn't be too crazy to just come and get them. I know shipping would be crazy expensive.

Hey @PappaSmurf unfortunately I don’t currently have any 3rds to sell but that may change by the time you’re ready for some so just reach out when you’re close. Sounds like a fun project!!

Looking for a power steering box if you have one.

I'm always on the lookout for very nice examples of:

1. Oak Driver Door Card (95-97 if that matters)
2. 91-94 "Toyota" Grille with valance. Big bonus if the Toyota lettering is Gold, and the valance is Dark Emerald Pearl (6M1)

Looking for a Idle Air Control Valve, 1994. What door cards do you have?

Looking for drivers and passengers electric seat control knobs in oak and the plastic bezels behind the knobs also in oak for a '96 FZJ. No idea if those parts were universal to all model years that had electric seats, but I think they may have been.

I’m trying to find a drivers headlamp assembly for 97 lx450

southern jeeper said:

Looking for a power steering box if you have one.

Click to expand...

@southern jeeper the only box I have at the moment was upgraded with a 105 sector shaft and resealed by someone other than me — it’s a very expensive box over oem because of the upgrade, Message me directly if that interests you.

Greyota said:

I'm always on the lookout for very nice examples of:

1. Oak Driver Door Card (95-97 if that matters)
2. 91-94 "Toyota" Grille with valance. Big bonus if the Toyota lettering is Gold, and the valance is Dark Emerald Pearl (6M1)

Click to expand...

Hi @Greyota I have some cards here I will check on the driver — as to the grille and valance, I can check also, where are you located?

JORQ said:

Looking for a Idle Air Control Valve, 1994. What door cards do you have?

Click to expand...

@JORQ I believe I do have an IAC valve — as to door cards, which color are you after? What is your location, shipping door cards can be very expensive as they are not small when boxed….just as a heads up

TheFleishIsRight said:

Looking for drivers and passengers electric seat control knobs in oak and the plastic bezels behind the knobs also in oak for a '96 FZJ. No idea if those parts were universal to all model years that had electric seats, but I think they may have been.

Click to expand...

@TheFleishIsRight I think you’re correct that the electronics are the same, I have a bunch from various years let me seeif I have one that fits your needs, thanks for reaching out!

tubalubb said:

I’m trying to find a drivers headlamp assembly for 97 lx450

Click to expand...

@tubalubb I don’t have any good LX lights at the moment, sorry about that, thanks for checking in!

swamp-thing said:

@JORQ I believe I do have an IAC valve — as to door cards, which color are you after? What is your location, shipping door cards can be very expensive as they are not small when boxed….just as a heads up

Click to expand...

swamp-thing said:

@JORQ I believe I do have an IAC valve — as to door cards, which color are you after? What is your location, shipping door cards can be very expensive as they are not small when boxed….just as a heads up

Click to expand...

Mostly interested in the IAC, but I believe my left rear door card has water damage. Blue grey color. I'm in central California.

swamp-thing said:

Hi @Greyota I have some cards here I will check on the driver — as to the grille and valance, I can check also, where are you located?

Click to expand...

Sounds good, I'm in Eastern Nebraska.