After seeing a couple other members with level lifts I decided to give it a shot. I started with an OME 861/862 setup but I couldn't handle the stinkbug look. After some contemplation I ordered a pair of Ironman TOY024B front 2" lift springs from Camel 4x4 to try to level it out. I may have slightly overshot level, but I am very pleased overall. The ride is much smoother than with the OME 861's and with a trim packer in the rear I will be nice and level. For reference all of the pics have the same rear cargo (full recovery gear, overnight gear, one 3rd row seat, and a 33" spare) as well as full fuel. My caster is now in the negative numbers, but not sure where as my alignment rack doesn't want to read negative. I plan on fixing this with Landtank's plates as I do plan to go with a FOR lift next year. For now this lift with the 285's is great.
Hub to Flare Measurements:
861/862 = 20 3/4" front and 21.5/21 rear
Ironman TOY024B = 22 1/4 and 22 front
First pic is with 861/862
The red spring is the 861
Final pic shows TOY024B front and 862 rear with no spacers
Hub to Flare Measurements:
861/862 = 20 3/4" front and 21.5/21 rear
Ironman TOY024B = 22 1/4 and 22 front
First pic is with 861/862
The red spring is the 861
Final pic shows TOY024B front and 862 rear with no spacers