Manually locking and unlocking elockers

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sporin

Site Addict
Joined
Apr 23, 2003
Threads
170
Messages
3,502
Location
Windsor, VT USA
Website
www.ukemafia.com
Does anyone have pictures showing the "manual" locking and unlocking of the elockers? I know there is a way to slide something manually behind that cover to engage and unlock.

Reason I ask is that I want to make sure my front locker (in particular) is fully unlocked. I had been doing the "engage switch, then drive in circles in a dirt lot" trick to no avail but ever since then, I feel like I'm getting a clicking from the front that is louder and different then what I always assumed was a clicky birf.

It probably IS just a clicky birf, but I want to be sure my front locker isn't engaged just slightly and now eating itself on the street. Peace of mind and all that jazz.

(backstory, my elocker actuators are fubar)
 
You can't be "slightly" pregnant, and you can't be "slightly" locked with an e-locker. It's either in or it's not.
 
You can't be "slightly" pregnant, and you can't be "slightly" locked with an e-locker. It's either in or it's not.

If the e-locker is working correctly, that's true. His are not. If the spring isn't connected the locking collar might be moving on and off the splines, causing noises.
 
Sorry, but I stand by my original post. In the front, the fine splined locking cog is either engaged or it's not. There's a spring-and-ball on the shaft for the shifting fork that won't let it sit between positions. Similar to the 2WD/4WD shafts & HI/LO shafts in a part-time transfer case.

It's a moot argument, as it's easy to check. Pop the actuator off (12mm socket), take a screwdriver & flashlight, shove the geared rack away from the third. You can barely see it in the big open hole in this pic:

E-Locker4.jpg
 
Last edited:
Pulled both actuator motors off to have a look around.

Rear: at least one broken wire, and the wound up spring/magnet thingy is in unwound (looks very different then the front one). I resealed it with some silicone when I put it back on and it seems to have cured the oil leak that was coming from there.

Front: confirmed it wasn't "partially locked" and my clicking is just the birf. Motor needs some cleaning up but everything else seems to be in good shape. I'm optimistic.

Put it all back together as it's my only ride and I had plans but I'm feeling better about pulling things apart and trying to rehab. That broken rear wire is a worry though, it's cut right near the plug.
 
Back
Top Bottom