My hunch was correct. HZJ71 fuel lines are basically an exact fit for a 1985 BJ70.
Unfortunately, the rear most piping is discontinued but I’m cool using the ones I bent for that application to the fuel tank.
Bracket locations are just very...
Thought I would include some important things I've gotten from my local Toyota parts source (North Georgia Toyota in Dalton, for those in the southeast)
that I got over the past year. I order the items on their website by part number and I not...
So the "Season 3" finale is going to be next week :D :oops: . I still can't believe I got past week 3! Season 4 premier is already set up. Yes there is going to be a 2027 calendar to come out, I am working with a different printer this year...
God I need to order all that tubing before it goes away. I just sold the same fuel filter bracket today, received by mistake from Megazip. The curved pipe one was what I needed, for pre-filter fitted applications.
New power steering piping/hose assembly. These are different between RHD and LHD trucks with 1PZ/HZ/HD family of engines.
And a new return pipe. Available in US.
Assemblies installed:
Decided on a new fuel filter bracket. This...
Found an OEM P.S. pump and would like the FJ62 bracket to mount it in my FJ80. If you have a good condition free spinning pulley that would be great too. Thanks for any help.
With the 25 year rule and what can be brought over now legally, the 80s and early 90s 70 series won’t be much investment but they shouldn’t be treated as such anyways.
There is a lot of good info for the HVAC system and controls for 70 series here:
https://forum.ih8mud.com/threads/heat-ac-mixer-hvac-tech-info.1248131/
Hope that helps
Great insight, but could there be a different result for low mileage/sludged engines if this is addressed immediately? If the sludge can work loose in sustained use, could it be removed via deliberate maintenance?
i.e., flush the majority of...
91 HZJ75 pop top. Currently in illinois, but headed out to Idaho, Washington, Montana area this spring. Just starting a custom interior. I just joined the site, but I will start a expedition vehicle build thread soon.
Bell housing stiffeners installed:
Clutch disc:
Pressure plate:
The pressure plate to bell housing bolts. These are specific to this location and application: 90119-08134. Notice the hardness rating and shallow head:
Ready...
New rear main seal: 90311-95008. NOK is the primary seal supplier to the Land Cruiser series.
New pilot bearing: 90363-15017. The center ID is different between the H55F and the R151/R141F transmissions. PZJ trucks never came with the...
Couple of hardware notes:
Transmission cross member bolts: 90119-10586. Come precoated with thread locker.
The crossmember to transmission insulator nuts used to be 2 part numbers for nut and washer. Later trucks use an integrated nut and...
I have what appears to be that identical header on my 1HZ. No reason to mess with it - your truck is fine as it is. Most of these come from Australia and finding similar stuff here can be a challenge (but there is a US company that imports...
Toyota vs Toyopet.... a win/win
Toyota baseball team founded in 1947
Toyopet baseball team founded 2006
The company vs the dealership
lots of cool merch...