Dudleyfj40

If you stay Toyota 3 speed just swap the diffs to 3.73 and roll on. My 5.3 4 speed 40 will run as fast as you want to drive it. It’s very comfortable engine wise at 65mph on 35” tires and 4.11. 33s and 3.73 would be pretty much the same...

Maybe someone here can do something with these? Not mine and I know nothing about them other than what’s in the ad. https://www.facebook.com/share/1AK5FrNcFf/?mibextid=wwXIfr

Well, the guy called me. It’s his wife’s truck and he’s towing it to the shop I work at in Auburn

Back then, we didn't all carry a camera around in our pockets

Can also download the stl here: https://classicexpeditionvehicles.com/part-files/fj55-rear-power-window-driven-gear/

Just gave them a call yesterday. Sounds like they have adapters to convert all of my old 45* AN males to the o-ring versions. Then ordered one of the Kits that JMack mentioned. Hot weather is a motivator on this stuff. HA

I see PA12-CF10, ill have to do some research. I have maybe 100 ups and downs on the PETG, messed up and ran it too high when I wasn't watching. I'm gonna try these guys.

Try this: FJ-55 - https://www.dashtop.com/342-fj-55

Do you still sell them, or is there a file saved in Shapeways we can use. I have been printing PETG and the double d is my weak point.

Of all the ones i sold through shapeways . none have failed as of yet . they were all PA11 , SLS method . sales were about 50 for bolth styles . hope this helps

Everybody who's anybody (like me) has been using an 80 series non-ABS brake master with good results.

Here are the dates. 2423 IA-5, Hamilton, IA 50116 MIOBI off road park Hamilton Iowa More to follow.

I am doing an LS swap and have the mated 4L80e. Looking to sell trans and adapter to pay for the 4l80e adapter and stuff I need. The 700r4 is wired with Overdrive and push button torque converter lockup, brake pedal release and temp gauge. Solid...

Nice meeting you too Matt. I was telling my wife. That was the most Cruisers I have ever seen in together Iowa! And they were all so clean!

Drove over to the opening of Powers 4x4 in Des Moines. Looks like an awesome set up. If ever in Des Moines, highly recommend checking them out. Was able to meet up with some other 55 owners…including the owner of the shop has a pig, His is the...

Tshirts done!

Last couple of days I finished getting the new 3:73 3rd installed in the axle housing, Finished getting the intake and exhaust manifolds cleaned and prepped. The springs looked ok I went ahead and pulled them apart installed new center pins and...

For you non Book facers. Tall Corn will be there in force. Show off you Toyota's.

https://facebook.com/events/s/grand-opening-party/1960305044873350/

I wish I had a good way to get it back to Iowa.

Here's my custom GAMIVITI 55 rack. I made it about a foot longer and add a bunch of plates light tabs.

We needed some hard to find hardware at KOH and he tore his trailer apart getting what we needed. Then made sure we had everything else else we needed. Rock solid guy.

Pretty great series on YouTube watching the legendary Shannon Campbell's fabrication processes on on FJ40.

Cost of shopping only, otherwise free to whomever may need these.