3_puppies

X2 wondering about making the aftermarket sender fit the stock pattern

Because people like pics, here’s a couple. First, the remodeled guest bedroom just before we moved in Then, a new porch for the guest house that I knocked out a couple of weeks ago, after @tequila4x4 put in a new tankless water heater for us...

do the stud/screws rotate/turn? or are they captured where they will not turn?

I beg to differ, THAT IS NOT TOYOTA ENGINEERING maybe when the first aftermarket sender was installed, is when this contraption appeared who did the V8 install years ago? do the studs twist/rotate? no sealant should be used/required with a good...

why the adaptor plate? the OE one would have used the 5 screws to hold the sender to the tank. can you not remove it and go straight to the tank as it is supposed to be mounted

I dont know why people are saying you dont have to post a price... i was always under the impression from woodyś classifieds rules that it was required... it prevents situations such as this... Our Illustrious leader says... (unless there is a...

Fixed Found wire disconnected from solenoid. Knew it has to be something simple but luckily i found it while trying to jump starter. Thanks to all who hung with me especially Jonny C who invested a lot of time.. Thanks

I forgot about the kickdown cable.

in another post, it is a 92 so the trans would be an A440

Wow! A whole two month have passed since my last post. Busy, very busy. Unfortunately, not Mark’s Off Road busy. But very good life busy. My wife and I are now basically moved into the guest house. It’s been an interesting phenomenon that, while...

the later 81+ carrier has larger upper? hinge with larger bolt pattern and an extra bar for strength than the earlier model

almost certain the 79+ has a fusible link off the positive battery terminal, check that. a bad fusible link would cause your issue atleast 1 maybe 2 hidden fuse locations on later 40's, going from memory 1 is under the hood by the blower motor...

oil level correct at temp? maybe try the party trick and a Rodney flush is this a new rig for you?

No need to replace the fuse box if its the EFI fuse issue. The terminals that hold the fuse loosen over time/heat cycles. Those terminals can be addressed directly instead of $$ new fuse box. A used box may have the same issue and the new box...

I may be able to help with a Landcruiser drivetrain and I'm in the state.

Hi all!! I'm new to the forum and thought it would be good to introduce myself. I'm Europe-based and bought my 1980 HJ45 with one of my first paychecks over 10 years ago. I've always thought the 40series looked insanely cool. I had a dream to...

bumper and winch combo

@medtro fix has repaired many without replacing the fusebox here is the thread on my "fix" on my 2000: https://forum.ih8mud.com/threads/fuse-box-issue.1356799/ also search medtro for solution mine has been like this for over a year now

the connection under neath where you can't see it can be an issue, that is why I suggested the fuse box work around/bypass, remove the relay and have fused keyed power to feed the ecu?

fuse box work around/bypass??

Don't forget spare fuses. And vise grips for battery terminals.

have you put a magnet on the areas? it looks like a skim coat of "bondo" the white showing in the crack of the first pic, if it was paint it would be blue

think he'd notice?

the lower foam may be different shape?? the LX has different stiching pattern than the Landcruiser there are pics on here showing the differance

no US 45 had disc fronts, as they were only imported thru 1967. most other markets around the world had drums into the 1980's fairly easy swap to disc if you want to go that route, best to check costs on both. probably a good idea to go thru the...