the first 2 pics are OEM A/C
originally set up for R12, I like R12 versus R134A
A vacumn needs to be pulled and checked for leaks, we will also charge with nitrogen for a leak test
when the system is charged, there is a low pressure switch if the charge is too low and a high pressure switch if...
within the last few weeks someone posted up replacement for the lower with the sensor holes
here it is:
https://forum.ih8mud.com/threads/2f-thermostat-housing-for-smog-compliant-60s.1335532/
if it is the same as an FJ40 radiator
drain coolant
remove top and bottom hoses
remove bolts that hold the fan shroud to the bracket, these should also hold the radiator to the bracket
move shroud toward engine
radiator should lift out
jack up 1 end of the rear axle, chock front axle, trans in N, transfer in 2H, release park brake, put mark on driveshaft
rotate the tire 1 full revolution and count how many times the driveshaft spins
this will get you close to the ring and pinion ratio
it is labor intensive, and most shops don't want to do the work.
maybe cross the border and have it done down there
find an old school guy who is willing to take the job on
learn how to do your own metal work
without pics, it is hard to guess, but to pay someone to do it in CA could very well...
there is only 1 variation of how Toyota attached the removable top to the tub, it is with the latches and bolts thru the rim , also latches along the top of the windshield frame
the top would also seperate right above the door latch on the "B" post
this is how they were all produced from the...
that is not the way a removable top is made from the factory, it was a fixed top model that has been modified.
wonder how it attaches at the windshield frame?
X2........Not a factory removable top.
that doesn't look like the stock boot/sleeve
the stock one is flexible but also formed, as it isn't straight, it has an off set to it from 1 end to the other