Wiring IPF 968 Lights to Factory Switch Help *** Resolved ***

Joined
Apr 12, 2020
Messages
15
Location
Seattle WA
Visit site
Hello all, I purchased a triple locked LX450 owned by a few Mudders before me a few months ago and I was hoping someone on here would help me when it comes to wiring the IPF 968 lights to the factory fog light switch. I’ve already hooked up the lights using the IPF switch and they work great but that switch is junk. Electrically I’m an idiot so any help would be much appreciated. The yellow wire which connects to the red wire is tapped into the running lights. I’m guessing the white, red, and black wire need to be connected to the new switch, I just don’t know what terminals, the numbers 2,3 and 4. Any ideas what wire goes where?
EA90ADB8-1705-4FA6-822D-F5F0EB4F0E32.jpeg

02D0571D-A2CE-46D7-9A8E-9965389F111C.jpeg

55DA6D95-37F1-4AEA-A920-61FA8C242CD1.jpeg
 

TomH

SILVER Star
Joined
May 14, 2003
Messages
1,154
Location
Seattle
Visit site
Check this post.

 
Joined
Apr 12, 2020
Messages
15
Location
Seattle WA
Visit site
Check this post.


Thank you! I got it handled and all hooked up. Installed with the orange light on the top.

Top connection is for the ground- Black wire
Middle connection is for the power in- Red wire
Bottom connection is for the power to relay- White wire

61EF45F0-43C2-47C7-B3C5-F22AE02BA69B.jpeg
 

Users who are viewing this thread

Top Bottom