Wire ends to 90980-11140 connector - for Windshield diverter valve (1 Viewer)

[gaylon]

Good day. A squirrel got into my engine and ate his or her way through the wires that actuate the windshield washer diverter valve. I have a diverter valve and a new grey connector arriving soon, but the brown wire ends that go into the male connector are not reusable. Anyone know the part number? Pic here to show connector.

 

[Malleus]

Do you mean the metal terminals inside the connector housing or the rubber seals on the rear of the connector housings? Neither are available from Toyota. However,
Ballenger has terminals:

I'd recommend the terminal crimper, it's a single use tool, but you'll use it again, if you own a Land Cruiser. IMO, it's well worth the investment, because if you fail to get the terminal crimped properly, the connection will fail, sooner or later, and then you'll spend a while trying to find the fault.

and seals:

FWIW, Ballenger can put a kit together with connector housings, terminals and seals for significantly less than you can get the housing alone, from most other vendors.