Windshield Harness Clips (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 4, 2019
Threads
37
Messages
97
Location
Atlanta
What are the best clip sources on the <74 high-mount wiper harnesses?

Dealer says the clips are discontinued.

These are so visible compared to other locations that I'd like them to be as accurate/stock as possible.

Also, is there supposed to be a grommet here where the harness exits the frame?

Thanks!

IMG_3077.jpeg
 
I got mine used. Either SOR or CruiserParts.net, I cannot remember which. I cleaned them up then shot them with some plastic coat.

Yes. Cannot remember if I went OEM or not. Worst case, measure the hole and pick one up at your local ACE. Just split it to install. I put the split side down. Looking at the parts diagram, it might be: 90480-10300. The website below lists the diameter which you can measure to make sure.

 
Last edited:
Last edited:

Users who are viewing this thread

Back
Top Bottom