windsheild wiper (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Do you have wiper motors?

Do you have arms and blades?

Do you have wiring intact to the motors?

Do you have a wiper switch?

You will need all of these pieces to make them work....



Oh Blake...


You, just like EVERYONE else will get crap out here....suck it up pal.


Good luck!


-Steve
 
Do you have power to them?
 
Have you verified with a multimeter or a test lamp that you have power at the connections for the wiper motors?
 
Poser said:
Do you have wiper motors?

Do you have arms and blades?

Do you have wiring intact to the motors?

Do you have a wiper switch?

You will need all of these pieces to make them work....

And a charged battery :D

Hey Blake, lighten up man. :beer:

Where's the clicking sound?
 
Are the wires at the motors hooked up in the right order? Pretty sure its supposed to be blue/white on top, then white/black. then blue/black on bottom. Take the motors out and give them a good cleaning. clean out all the old grease, clean the motor contacts, brushes. :)
 
Poser said:
Have you verified with a multimeter or a test lamp that you have power at the connections for the wiper motors?




Um....




Have you verified with a multimeter or a test lamp that you have power at the connections for the wiper motors?? ;)
 

Users who are viewing this thread

Back
Top Bottom