Some might by now realise that I'm installing a winch on my truck. I'm curious as to how useful having the ability to control the winch from within the cab is. Since the hydraulic only uses to solenoids totally a 2amp draw, it's basically running 3 wires up to a SPDT momentary rocker switch. Nothing like what is posted on Slee's site.
The other option is to install both possibilities, cab control and also the hand held unit. This would require a relay to automatically cut out the cab control when the hand held unit was plugged in. Again this isn't really a big deal as the hand control has an extra pin which could be used for this purpose.
The other option is to install both possibilities, cab control and also the hand held unit. This would require a relay to automatically cut out the cab control when the hand held unit was plugged in. Again this isn't really a big deal as the hand control has an extra pin which could be used for this purpose.