- Thread starter
- #41
Thanks for the 411!Hey k2mantra, I've got a 92 FJ80 with a stage 1 Slinky 75mm intermediate lift, Black Hawk HD extended rear LCA, Black Hawk rear adjustable UCA, Black Hawk from adjustable panhard bar, Slee castor correction plates, Delta rear 3" panhard bracket, and 35x17 tires. The Slee caster correction plates gave me 2.0 degrees which puts me at the minimum end of caster per FSM and zero toe. My truck tracks and steers great but I've also replaced a lot of stuff. The rear alignment numbers are Left Rear 0.11 degrees toe and Right Rear 0.01 degrees toe with Thrust Angle at 0.05 degrees. I'm not sure how the rear toe on my truck is off like so. Despite the Delta 3" bracket the rear end still pokes a little more on the rear passenger side and I'm thinking about adding a Slee adjustable link into the equation. Also, I found an interesting link on rear alignment on a 100 series so I don't know how much different both platforms are.
Aligning rear end?
Hi, I just took my LC into a shop that specializes in aligning higher end vehicles, sports cars, track cars, etc. I went there because the other local alignment shops (firestone, sears, etc) have horrendous ratings in my area. It was a little pricey, but they have a great reputation, and do...forum.ih8mud.com