For Sale WI - Aftermarket Carb Setup with Adapter NEW or Like NEW - FREE SHIPPING (1 Viewer)

[Drake2]

Came with a 1973 F-Engine that was swapped out for a 350 V8. Not sure if this was ever installed or ran. Very nice condition and super clean. Use the adapter or remove for a 2-barrel application. Thanks to @JohnnyC for letting me know this is NOT a Weber brand but some aftermarket carb. Manufacturer unknown as there are no markings whatsoever. I would think $100 shipped should be fair

$100 shipped

 

[Grayscale]

That was bolted to a 1-barrel manifold if it had that spacer.

I just bought something like that from JTO for hooking up a 1-barrel (more of a '60s and earlier carb) Aisan SD-40, Rochester, Zenith, AutoLite, Carter, etc. The Weber side can be placed facing down on the 2-barrel intake manifold, so you can bolt up a 1-barrel carb or equivalent type Sniper. I have this idea that placing the idle circuit charge away from the far inboard corner of the F/2F will keep cold gas drops from going in a centrifugal motion as it gets pulled thru the various paths on the intake. Sure, the original equipment was fine, but, it used to cook the intake charge with the exhaust heat - those days are long gone. I'm about to order something like this. Who knows if I can make it work?

 

[Drake2]

165

 

[Drake2]

FREE SHIPPING

 

[Drake2]

Still free shipping

 

[JohnnyC]

That’s not a weber… that’s a weber ccp clone

 

[Drake2]

That’s not a weber… that’s a weber ccp clone

How can you tell? Is there something specific about it? I want to make sure my listing is accurate.
Thanks

 

[JohnnyC]

1) weber embossed logo missing on the top plate … 2) serial number stamp missing on carb base

Certified weber dealers have a tin tag on the first bolt near the fuel inlet

 

[Drake2]

1) weber embossed logo missing on the top plate … 2) serial number stamp missing on carb base

Certified weber dealers have a tin tag on the first bolt near the fuel inlet

Thanks for the additional info. I verified there are no WEBER stamps or tags. I will update the listing accordingly.

 

[65swb45]

Pardon the partial thread hijack Drake. Delete if you want to. Just strikes me as an oxymoron to say 'Weber clone'
GLWS.

 

[Drake2]

@65swb45 maybe? Will trade for a decent set of 6-spline WARN barrel hubs....if you have any left

 

[65swb45]

Already have two bbqs Drake: all a Weber is good for!😛