White Knuckle 66.5" or 69"? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

20170923_142354.jpg
Go 69 and dont look back. I got a can of primer and black semi-gloss spray paint and painted them myself. Then put some grip tape on them. Saved my butt a couple times on the kokopelli trail during cruise Moab. Fitment is really good too
20160904_114927.jpg
 
What would be a good angle for those sliders considering the :princess: is the shortest one of the bunch now at 5'7" I think? She drives it a lot. As I mentioned on the previous page, my future setup will consist of 1" body lift and 2" of suspension lift.
 
@ewillis, do you know how much the sliders weight? Are these drop bracket compatible?


As much as I like my OPOR sliders I like the idea of running drop brackets

UPS delivered mine and the paper work said 175 lbs.
That's 69 inch version with full length top plates.

Just put them on yesterday.
 
What would be a good angle for those sliders considering the :princess: is the shortest one of the bunch now at 5'7" I think? She drives it a lot. As I mentioned on the previous page, my future setup will consist of 1" body lift and 2" of suspension lift.
I went for the 10 degree angle on mine for the wife and kids. Also did the diamond plate on the back part so their little feet wouldn't slip into them. Glad I did it. I don't think I lost that much clearance and gained a little help for the wife. Mine is 5'3 and short legged though, so yours may be fine. I'm on ko2 315s and Ome 850/860 fwiw.
 
15* is nearly flat...my nine year old daughter hops in and out no prob. I'd go standard 20* if I had a do-over
20171111_143231.jpg
 
That sir...is a seed!
20171111_175222.jpg
 
Made me look though! :D
 
Anyone have Pic's of these with the Top Plates ?

I can take photos for you later today, i have the full tread plates. Wouldn't have it any other way.
 
20180502_221319.jpg
20180502_221338.jpg
20180502_221248.jpg

Full plates. Not the standard angle, 15 degrees I think
 
I’ve emailed WK about this. Still haven’t ordered. Anyone keep the front running board boot in lieu of the flap?
 
Just ditch the flap. The 80 looks great without the flaps!

74646699-826C-4790-B2E8-65856E67A7C9.jpeg
 
Last edited:
Similar to all that are saying the longer 69" length.... I did the same and nice product.
 
I got the shorter, 20 degrees, with filler plates. I want to keep the flaps because I do a lot of gravel miles and that'll kill the paint pretty quick without. I'm debating changing the order to full length and just cutting holes in the front flaps though?
 
I agree with just cutting holes
 

Users who are viewing this thread

Back
Top Bottom