Wheel Spacers on Stock Rims and 285/65/18 KO2s (1 Viewer)

[757driver]

Hey Guys,

Thinking about putting these wheel spacers on my stock 2016 with 285/65/18 KO2s. I want a little wider, aggressive appearance without any sacrifices. Any reason not to use these? Any rubbing issues to be concerned with?

Spidertrax Toyota 5 on 150mm x 1-1/4" Thick Wheel Spacer Kit (Pair)

www.spidertrax.com

Thanks!

 

[Redbull]

Hello from Newtown!

You would be fine with just the tires but with spacers you may need to trim a little and remove the mud flap.

 

[757driver]

Greetings! Thanks for letting me know. I'll stick with with the tires alone for now.

 

[afgman786]

If anything, it'll barely rub the front of the fender liner where the front mudflap thing is.. easy to take off and you'll be good

 

[BlackMammoth]

my 285/70/18 Nittos rub the KDSS and mud flaps - but only at extreme lock and barely... This is with stock 18" rims.

Someday I may do the KDSS relo thing but so far has barely touched the paint.

 

[dubaicruiser]

my 285/70/18 Nittos rub the KDSS

Can you show us any pictures of the rub?

 

[BlackMammoth]

Can you show us any pictures of the rub?

I’ll try to grab some today.

 

[gx2lc]

Sorry to bump an older thread. This is something I'm considering on my 2019 on heritage rims (not sure if offset is different than stock) @BlackMammoth did you notice any changes in handling and turning radius?

I'm running 275/65/R18 slightly taller and skinnier than stock. Am concern about rubbing and handling changes due to increased offset