Awesome write up and pictures.
"Snap ring size C 2.6mm; Adjusting nut @ 65ft/lbs + locking nut @ 47 ft/lbs = 13lb breakaway"
I think FSM instruction say to tighten to 6.5 N m *
Almost posted this...
Realized the units posted were different from what I used (N m) when done recently.
Pay attention to the units for torque specs
It seems like the breakaway is more indicative of the actual preload, the torque is just supposed to get you in the ballpark? In my case, it took much more torque than the manual to get the right preload.