what size to get for wheel adapter? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

LEXCRUISER

LEXCRUISER

Joined
Sep 14, 2005
Threads
37
Messages
184
Location
SOCAL
I am looking to purchase wheel adapters. The reason is that to have a better look of my ride, wider out looks much better, as my opinion.

2003 LX470
Tires that I have right now are BFG A/T 285/65/18. Planning to get OME lift very soon. Which wheel adapter's size should I get?

6x5.5x1.5" or 5x5.5x1.5"

Thank's!
 
I have 1" spacers on the front of my Cruiser along with wider tires. You need to look into the 33 x 13.50 x 18 Terra Grapplers if you want a wider tire/look.

I got my spacers (not adapters) at performancewheels.com. They were $85 each.

This is the only picture I have on this computer of the width of my tires to the body.

I have the OME lift, but Christo Slee ran these tires without lift for a while and they worked.
2.jpg
 
1" spacers up front on mine too; Slee Offroad was my source.
 
wngrog said:
I have 1" spacers on the front of my Cruiser along with wider tires. You need to look into the 33 x 13.50 x 18 Terra Grapplers if you want a wider tire/look.

I got my spacers (not adapters) at performancewheels.com. They were $85 each.

This is the only picture I have on this computer of the width of my tires to the body.

I have the OME lift, but Christo Slee ran these tires without lift for a while and they worked.
Click to expand...

Hi wngrog,

Can you post more pictures of your ride?
Thank you!
 
Montana Cruiser said:
Why only up front?
Click to expand...

As you lift IFS, the angle of the arms changes, effectively "narrowing" the track. With a solid axle (like in the rear), this is not a concern.
 
i think my wheels stick out more than most peoples. Check it out

You can see the first row of the tread on the outer edge. I have stock tires and no spacers. I think its the wheels i have, i think they are a RWD offset. Anyways, i love the way the truck handles with the wide stance...plus it looks so much nicer.
widestance.jpg
 
dclee said:
As you lift IFS, the angle of the arms changes, effectively "narrowing" the track. With a solid axle (like in the rear), this is not a concern.
Click to expand...
The track width reduction on a 2" lifted 100 is approximately 1/4" to 3/8" per side (1/2"-3/4" total). So with 1" spacers, the track is 1.25 to 1.5" wider total than at stock height.
 
1loudLX said:
i think my wheels stick out more than most peoples. Check it out

You can see the first row of the tread on the outer edge. I have stock tires and no spacers. I think its the wheels i have, i think they are a RWD offset. Anyways, i love the way the truck handles with the wide stance...plus it looks so much nicer.
Click to expand...

Funny how yours looks so much bigger in this picture!
 
i stopped at a toyota dealership down teh street to buy a part...and as im walking back to my truck i noticed how much wider my wheels are than the stock landcruiser that was on the lot. I just had to take a picture, i just wish it had come out better...damn cell phone cameras.
 
You must log in or register to reply here.

Similar threads

P
Best size Method wheels for 100 Series Stock Lift
Replies
5
Views
721
Patassa
P
H
What services should I get done to baseline LC?
2 3
Replies
46
Views
5K
Bisho
Bisho
S
Tire size for Nomad wheels
Replies
1
Views
673
Trunk Monkey
Trunk Monkey
AARONTLC
Ok. What Did Your Cruiser Get for Christmas
2 3
Replies
40
Views
3K
gmr76
gmr76

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom