What rotors are these? (1 Viewer)

[dpr64]

I have 2 sets of unused/new rotors that have confusing part numbers on them... Bendix PRT 1661, one set from China and 1 set from Canada. Says when I look them up that they fit landcruiser models from 1990 to 1992... ????
1990 is a FJ62 and the 1991-1992 is the FJ80.
Anyone out there with an idea as to what these really fit?
PICS

Canadian ones...

 

[dpr64]

The Chinese ones....

 

[ajax1]

91 92 is semi float same as the 62

 

[dpr64]

91 92 is semi float same as the 62

So would the 88 and 89 be semi float or the same also? As in 88-92 front axles being the same or able to use the same front rotors?

 

[ajax1]

Fronts are different between the 80 and 62 or 60 series.
The rears are both semi floats, drums

 

[dpr64]

The confusion stems from all the vehicle parts sites saying that these 1661 rotors fit 1990-1992.... How can that be?

 

[BILT4ME]

According to the RockAuto site, Bendix PRT1661 is for the 1990 Land Crusier from 1/90 on.
Bendix P/N PRT1510 is for up to 1/90.

Note the differences in the dimensions between the two different part numbers I have shown.

According to the RockAuto site, the 1/90 through 92 MY take the PRT1661 front rotors. Not saying it's right. It's what's listed.

The McGeorge Toyota site shows a 91 LC and a 90 LC take the SAME brake rotor, (EDITED OUT. SEE ONUR POST BELOW)

So, I'm not sure what your confusion is. Both of your rotors show the same P/N, one is from China, one is from CA. Are the MEASUREMENTS different?

What do you REALLY need?

Use the sites as we all do: Rockauto, McGeorge Toyota, Partsouq.......You can get your own answers to these questions with 10 minutes of searching.

 

[dpr64]

Both sets of rotors are the same, that is a given. Issue is, how can they fit ANY 1990 which is a FJ62 AND the 1991-1992 FJ80??
Are these exclusive to the FJ80 91-92 only and the 1990 compatibility an error?

 

[dpr64]

Okay, based on dimensions, these are for a 1991-1992 FJ80... Any association to the 1990 is an error and I am not sure why ALL the sites have this part number listed as 1990-1992. Whew...

 

[BILT4ME]

Both sets of rotors are the same, that is a given. Issue is, how can they fit ANY 1990 which is a FJ62 AND the 1991-1992 FJ80??
Are these exclusive to the FJ80 91-92 only and the 1990 compatibility an error?

There is probably a legitimate 1990 application, since it states 1/90 and later for one P/N.

(EDITED OUT FOR CLARITY. REFER TO ONUR'S POST BELOW.)

My 96 was made 8/95 so I have to really watch my parts and search by VIN.

 

[OGBeno]

The clarify the muddy information from above:

All FJ62's were manufactured on or before 12/1989. There are no manufactured FJ62's after that date though there are 1990 MY FJ62's (manufactured 1989 for MY 1990).

43512-60100 are the rotors for all pre-1/1990 and earlier disc brake heavy duty Land Cruisers (4x/6x/7x).

43512-60011 is for disc brake LC's prior to 6/1980.

43512-60050 is for all early 80 series trucks (HDJ80/81 and FJ80) through beginning of 8/1992. I assume these aftermarket rotors are 43512-60050 equivalents.

The part number changes again worldwide in 8/1992 to the 43512-60090 part number moving forward to EOP.

 

[BILT4ME]

The clarify the muddy information from above:

All FJ62's were manufactured on or before 12/1989. There are no manufactured FJ62's after that date though there are 1990 MY FJ62's (manufactured 1989 for MY 1990).

43512-60100 are the rotors for all pre-1/1990 and earlier disc brake heavy duty Land Cruisers (4x/6x/7x).

43512-60011 is for disc brake LC's prior to 6/1980.

43512-60050 is for all early 80 series trucks (HDJ80/81 and FJ80) through beginning of 8/1992. I assume these aftermarket rotors are 43512-60050 equivalents.

The part number changes again worldwide in 8/1992 to the 43512-60090 part number moving forward to EOP.

Thanks Onur! I edited my posts to remove erroneous information to let yours carry.

 

[dpr64]

Yes, thanks to you both...I appreciate knowing what these will go on as I did not buy them, sort of inherited the lot!

 

[Feistl]

Just a final note... the 80 series was released here in Australia in 1990... hence it being from 90-92.

From memory, in september 92 Toyota upgraded the front rotor and caliper to a larger size hence a different part number.

Also for what it’s worth, you can “convert” earlier (90-8/92) landcruisers to the later calipers and rotors but you need the backing plates as well. The later brakes are a pretty substantial upgrade...

Cheers