What else do I need for this clutch and parking brake job? (1 Viewer)

[84lumberman]

1970 FJ40 stock

I think I have most things:

1. I contacted Valley Hybrids and got a complete parking brake kit so I'm good there (thank you blossett)
2. Clutch plate, disc, throw out bearing, pilot bearing, rear engine seal, hub clips, clutch alignment tool, flywheel plates (qty 3), clutch fork boot, and clutch hub (throw out bearing hub)

Do I need more seals? Maybe a transmission input shaft seal? Or a transmission to transfer case seal? Rear output seal? I'm not sure of the names of these seals or what else is needed. I REALLY don't want to do this twice and I need to stop the leaks. I want to make sure I have each and every individual seal I need when I change the clutch and parking brake

 

[hobbes]

100% yes to trans input seal. Easy to do and you’ll be mad if you don’t and it leaks. If your going to have the xfer case out I would reseal that as well. I did the double parking brake seal from Mudrak. 1600+ leak free miles and parking brake works like a champ.

 

[84lumberman]

So, should I spend the $30 on this kit with multiple seals:

Transfercase 1963-8/80 - Specter Off-Road

Toyota Land Cruiser parts since 1983. From the oldest FJ25 and FJ40 to FJ45 BJ40 FJ55 FJ60 BJ60 FJ62 FJ70 BJ70 FJ80 and 100 Series, SOR has the largest selection of top quality new and used OEM and aftermarket Land Cruiser parts in stock in the world. Specializing in restoration parts for both...

www.sor.com

Or is this one ok:

Transfer Case Input Seal - OEM - FJ40, FJ45, FJ55 1963-1980

OEM Toyota - Fits FJ40, FJ45, FJ55, BJ & HJ - 1963 - 7/1980 The transfer case input seal should be replaced anytime the transfer case is separated from transmission.

cruisercorps.com

Or this, but they are out right now:

Transmission Input Shaft Seal - OEM - FJ40, FJ45, FJ55, FJ60 1963-1986

OEM Toyota - Fits FJ40, FJ45, FJ55, FJ60, BJ, HJ & 70 Series - 1963 - 4/1986 This is the OEM oil seal for the transmission input shaft. It is located behind the front bearing retainer. A must-have part for any transmission rebuild. Fits 3spd, 4spd, and 5spd transmission up to 4/1986.

cruisercorps.com

And why do these look different but claim to be the same and for the same year:

Tranny & Transfer – JT Outfitters

www.jtoutfitters.com

Transmission to Transfer Case Seal for Toyota Land Cruiser FJ40 55 – JT Outfitters

www.jtoutfitters.com

 

[Skeet]

Just call @orangefj45 back. He'll send you exactly what you need.

 

[orangefj45]

Happy to help, feel free to call if you need info or parts.

Georg

 

[84lumberman]

Happy to help, feel free to call if you need info or parts.

Georg

Sent you a PM yesterday