Waste Gate actuator bracket (1 Viewer)

[Zekester]

So I clocked my CT 26 to fit the 3B, and when i did, the waste gate actuator was out almost 90 degrees....you can see the actuator on the left, and the little arm on the waste gate on the right...

 

[Zekester]

So I made this bracket out of stainless...

 

[Zekester]

Then bolted it to the old mount holes...

 

[Zekester]

On emore bolt picks up the housing, so it's solid, and Voila, my Actuator now lines up with the arm...

 

[Falco80]

Neat job on that bracket and welds.
I always like looking at turboporn...