Waste Gate actuator bracket

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Nov 17, 2006
So I clocked my CT 26 to fit the 3B, and when i did, the waste gate actuator was out almost 90 degrees....you can see the actuator on the left, and the little arm on the waste gate on the right...
turboflange 004.jpg
So I made this bracket out of stainless...
turboflange 005.jpg
Then bolted it to the old mount holes...
turboflange 006.jpg
On emore bolt picks up the housing, so it's solid, and Voila, my Actuator now lines up with the arm...
turboflange 008.jpg

Users who are viewing this thread

Top Bottom