vintage teq parts.com alternator and tensioner.

brian

SILVER Star
Joined
Feb 7, 2003
Messages
11,567
Location
lebanon,pa
Website
www.facebook.com
my cheap rebuilt alt from advanced zone s*** the bed so i sprung for a denso upgrade... @ToyotaMatt from vintageteqparts.com threw a pretty good package together with all the correct plugs and connection parts in one place...i normally would rather stab myself in the hand with a dull knife than do electrical work, but this whole deal was far less painful then that...and well worth it, since once i got started all the wires at terminal connections for alternator were pretty corroded and with the packaged kit i was able to remove a few inches of the old wires and get back to decent looking copper while installing new prongs for the new plugs.
i saw matts new tensioner bars pop up on forum not that long ago and decided to spring for one since i have a few of their other odds and ends and its all been good stuff... and i was going to have the alternator out. this new bracket that adds the tensioner feature found on the later 2Fs fit like a glove and like everything else i have purchased from him, this stuff fit like it was made to be there. all in all two thumbs up.

alt1.jpg


altten1.jpg


altten3.jpg


altten2.jpg


altten5.jpg


altten4.jpg
 
Last edited:

ToyotaMatt

Factory Focus-Point Mind-Set Approach
Supporting Vendor
GOLD Star
Joined
Aug 12, 2007
Messages
20,046
Location
EAST COAST
Website
vintageteqparts.com
Will these work if your Alt. is on the left side?



Thanks for the KIND words @brian :cool:

if you have a 1962-12/74 F . F1.5 and or a NON-USA 2F / 3F Carb. then the Drivers Side Lower Alternator Option is for you ........







1653320477150.png



1653320512961.png
 

ToyotaMatt

Factory Focus-Point Mind-Set Approach
Supporting Vendor
GOLD Star
Joined
Aug 12, 2007
Messages
20,046
Location
EAST COAST
Website
vintageteqparts.com

Users who are viewing this thread

Top Bottom