Vendor or site that might have these jack handle extenson bolts? (1 Viewer)

[dpr64]

I have a few sets of extension handles or rods for the bottle jacks that came in the 60 and 62 series and they are missing the OEM 12mm short square bolts/screws with the philip head or plain head (both were available I think) Any idea on if they were/are available just by themselves and not part of the jack handle extension?

Moderators, PLEASE DO NOT move this to the wanted section.. Thanks.

 

[Michael Hanson]

Hi, Would like to also know a vender. Mike

 

[tucson_sailors]

If no joy on that, might be worth going down to an Ace hardware with the extension bit and checking their screw/bolt section for one that matches the pitch. Could be round head and all it would take is a bit of filing or a couple of passes on the belt sander to square off the sides to make one that would look a whole lot like the OEM.

Since you're in Tucson, I would recommend the 22nd and Kolb Ace. They are very well stocked.

$.02

Glenn in Marana