Valve Order Intake/Exhaust (1 Viewer)

[petescoffee]

About to set the valve clearances on a 2F which valves are intake and exhaust?
1- exhaust
2- Intake
3- Intake
4- Exhaust
5- Exhaust
6- Intake
7- Intake
8- Exhaust
9- Exhaust
10- Intake
11- Intake
12- Exhaust

Just want to make sure.

 

[PabloCruise]

Pete,

First of all, you are not THE Pete, of Pete's Coffee, are you?!? If so, I love your frickin' coffee

Anyway, your order looks right, w/o being able to see my 2F in front of me.

The FSM says to line up the #1 hole at TDC and then adjust a prescribed number of valves, rotate crank 360 and then do the others...

A little key is to do the valve #'s they say, front to back, and then when you turn the crank, just treat 12 as 1 an do the same order, back to front.

Also, looking at your exhaust manifold will verify which valve you are working on...

 

[petescoffee]

No not the Peet of Petes coffee. I do drink it every morning though to get me going.

The adjustment order I understand I was looking a s ervice manual and it did not show which valves were which. So I I was trying to clarify.

 

[ranger]

They align with the exhaust manifold ports and the intake manifold ports. Easiest way to figure out.

 

[Mr. Toad]

Your order is correct. When you are adjusting the valves and you get tired of counting them off, or comparing their position to your list, remember that the ones lined-up with your air rail injectors (or plugs on the head) are the exhaust valves.