From what I'm hearing about ARB backorders, I may have given you a good deal! Good luck!Changing gears, got a set of lockers coming from @fitzy . Thanks @cjmoon for the linky.
View attachment 2634481
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
From what I'm hearing about ARB backorders, I may have given you a good deal! Good luck!Changing gears, got a set of lockers coming from @fitzy . Thanks @cjmoon for the linky.
View attachment 2634481
Just got an email that the advanced adapter shipped!!!
I would be interested in one or more sets depending on cost , 16/8 is a hard to find size for good looking cruiser wheelsFound the manufacturer finally that already has mold and makes these, even has them in stock. 16x8 6x139.7 and 106mm center bore. available in silver or gun metal. The issue is 0 offset, so you would need 300mm spacers to get the 3.25" backspacing.
Thoughts?
HEY, great news. Advance just confirmed that the 50-9612 kit will work with the 4WD 6l90 with no changes! You can also use the 2WD transmission, but then you have to cut off a portion of it.
View attachment 2575351
I wouldn't think you would need anything. I'm not sure what adapters you're talking about though. Ones to fit the factory gauge cluster sensors into the engine?Pulled the OEM wiring harness off the engine…. And realized that I had not ordered any of the adapters or stuff that I did for the first engine. Then started wondering if I need them since I’m using the new PCI harness and am using a gen 4 L96 motor. Sounds like a good rabbit hole…. @thatcabledude @cruisermatt
View attachment 2722389
I wouldn't think you would need anything. I'm not sure what adapters you're talking about though. Ones to fit the factory gauge cluster sensors into the engine?
You’ll leave the PSI harness/engine harness alone. No connector changes or adding of sensors. The wiring to the Toyota sensors from the factory stays the same. You just reroute it’s path to the Toyota sensors. The sensors themselves are just in different holes on a different engine.Yes... am I thinking about this correctly, that if I want to keep toyota gauges, I need to buy the oil pressure and temp sensor adapters and use the Toyota sensors and then just splice on to the new harness the right connectors?