Unable To Make Full Right Turn After Tie Rod Replacement and Ironman Lift (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 1, 2004
Threads
480
Messages
3,283
Location
So. Austin, tx
I helped my brother swap in a 2 inch Iron Man lift, springs, shocks and steering stabilizer. We also replaced the tie rod ends from Cruiser outfitters. When finished we took it out for a drive and the steering wheel will bind, unable to make a 90° turn at a corner. It was very late last night so we will address later today. To me it looked like the steering text stabilizers would compress completely but the steering wheel could not turn any further. I am going to pull out the steering stabilizer and see what it does but any other suggestions?

Truck is a ‘94
 
Tie rod clamps hitting the control arm?
 
Problem solved! Flipped the bracket and truck runs fine now! First picture is before & 2nd after. Thank you all!

A2C096BA-E43D-48D0-97F9-A6EC60C461BF.jpeg


088490A8-3ECE-463D-8807-4C822BD3ACF4.jpeg
 

Users who are viewing this thread

Back
Top Bottom