Hi,
I recently bought an ultragauge MX v1.4 for my 2021 LC200.
When I connected it to the OBDII port, most of the parameters showed "err". i.e ATF temp, gear position etc.
By trawling through forums etc. I have tried a number of different codes to resolve this, but unfortunately have had no success.
Just wondering if there is anyone out there who has a 2021 LC200 V8 5.7L who could share the codes they are using to get the ATF temp and other parameters on the ultragauge.
Thanks.
I recently bought an ultragauge MX v1.4 for my 2021 LC200.
When I connected it to the OBDII port, most of the parameters showed "err". i.e ATF temp, gear position etc.
By trawling through forums etc. I have tried a number of different codes to resolve this, but unfortunately have had no success.
Just wondering if there is anyone out there who has a 2021 LC200 V8 5.7L who could share the codes they are using to get the ATF temp and other parameters on the ultragauge.
Thanks.