Triple Locked Locker Actuator Maintenance (1 Viewer)

[danmcph]

Is there maintenance that needs to be performed on the actuator to get the maximum life out of them? I know the wiring components are no longer in production. Is there a common failure point on wiring that I should start trying to source a spare to keep on hand?

 

[Hornd]

Take it down (10mm Bolts) and Look inside. Itr should be Apparent what needs done and if Corrosion is Present.

 

[Kernal]

@danmcph : Try a search on this forum for posts/threads by member Landtank and use the terms rebuild actuator

 

[b16]

I have this on my todo list and have these two links saved for when I find the time.

locker actuator rebuild

I was asked to see what I might be able to do with a set of non working actuators. So I though I'd start a thread in hopes of helping others. Now these are really in a bad way and the outcome might not be what I'm hoping for but at least some of what I post might be useful. Being from New...

forum.ih8mud.com

rear e-locker actuator rebuild pics

Finally got around to doing this after putting it off for near two years. Like many, I had experienced the "sticky" actuator, tried "exercising" them, got it to work most times, sometimes just lived without it, etc. Last month it actually got stuck in the locked position with about 200 highway...

forum.ih8mud.com