Well, I decided to trim the front fenders and remove the inner fender liners. Also trimmed the firewall a little, and hit the fenders, molding and rockets with Raptor Liner:
Trimmed front fenders (1 Viewer)
- Thread starter dafun1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
After Raptor Liner:
Rudolph with your nose so bright
JunkCrzr89
Competent Ignoramoose
- Thread starter
- #5
Next tires, will be 37’s 
And yes, red is better than the gold nose it had before
And yes, red is better than the gold nose it had before
Last edited:
- Thread starter
- #6
Would have trimmed the rear fenders, but it doesn’t need it. I made that jump when I had an 80, but went up to 38’s. I did remove the rear bumper cover and will put the spare on the roof. Simple rear bumper incorporating the rear cross member is coming. Maybe I should start a build thread 
37s. Great ideaNext tires, will be 37’s
And yes, red is better than the gold nose it had before
- Thread starter
- #8
I’m really digging these Mastercraft Courser MXT’s. Running the 315/75R16’s on the stock 16x8’s. Seriously considering them in the 37x12.50R17. Would run a 17x8.5 KMC KM717 with 5.46” of backspacing, with no spacers. The 36x12.50R16 TSL radial is another possibility. I really like how narrow the TSL radial is in that size. Just a bit pricey, and no siping. These MXT’s are great on wet pavement, and decently quiet on the road
Last edited:
