Ok I am going to seperate my 3spd tranny from my 3sp tcase at the fire station sunday and then attach the tcase to a 4 spd tranny after some cleaning and so forth. I have a gear from a 74 40 that will mate the two together, but I have a few questions first.
1. Will basic hand tools be enough to swap out this gear(74 gear) into my tcase?
2. What are the rubber gaskets that are just to the left of the input shaft housing?
3. On the picture linked below what is the best way to cure the surface rust on the output shaft, and what is missing as far as the housing?
Thanks for everyones help.
Jake
1. Will basic hand tools be enough to swap out this gear(74 gear) into my tcase?
2. What are the rubber gaskets that are just to the left of the input shaft housing?
3. On the picture linked below what is the best way to cure the surface rust on the output shaft, and what is missing as far as the housing?
Thanks for everyones help.
Jake