Anybody have one that works ? I’ve tried quite a few. 16+ LC.
Trans temp code for scan gauge 2
- Thread starter Fj60+
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
UPR LC
GOLD Star
It works! It took four tries, but here is the answer (for my 2019 LC 200)!
To program Trans Temp (°F), enter:
TXD = 07E12182
RXF = 046105820000
RXD = 2808
MTH = 00090005FFD8
This is what I saved from another member post, I have not tried it yet.....
To program Trans Temp (°F), enter:
TXD = 07E12182
RXF = 046105820000
RXD = 2808
MTH = 00090005FFD8
This is what I saved from another member post, I have not tried it yet.....
- Thread starter
- #4
Heck to the ya bud, looks like it works !
Could be useful to know whether that's the pan or torque converter temp. Our transmissions can display either/both in techstream/obdFusion.
- Thread starter
- #6
Ave temp reading is about 158-161 that’s after hwy speeds and 40 mins of driving.
Last edited:
UPR LC
GOLD Star
That is likely pan temp. One way to tell is if the torque converter is unlocked in traffic or going up a steep hill slow speed, if the sensor was TC temp you will see a very quick spike in temps.