Trail Taylor rear control arm bushings needed (1 Viewer)

[TTCruiser]

Hi all,
I’ve reached out to Jason and haven’t gotten a response in a few days. Does anyone know where we can source the polyurethane bushings for his rear upper control arms?
I know metal tech sells bushing kits, but they are not the same size. Thank you

 

[MongooseGA]

Lemme know if you find compatible rubber bushings in your search. If you do, you can have the urethane ones out of my TT arms.

 

[OwnerCS]

Interested also. My adjustable uppers use dual Johnny Joints (trademark). If I needed replacements and couldn't get them, I would reach out to Johnny Joint.

 

[DTCsk8er]

Got the dimensions of the bushings? I am building my own set of arms, and have a stack of these Synergy Suspension Dual Durometer Bushings for the arms I am building.

These bring lots of flex, yet maintain the no maintenance rubber dampening, which is why I bought them. Anyways, their website has all of the dimensions, so perhaps there is one that will fit your arms:

Synergy Dual Durometer Bushing (DDB) Series - https://www.synergymfg.com/synergy-dual-durometer-bushing-ddb-series.html

 

[TTCruiser]

Thanks for the replies.
I’ll have to take the control arms back off to get the bushing dimensions. There might actually be a number printed on the end of the bushing that might help. Just have to find the time to do that. I’ll post a link or part number if I get it figured out.

 

[OwnerCS]

I see Johnny Joint rebuild kits in the following link. Does anyone recall the dimensions to match up with a given kit?

https://www.polyperformance.com/34464-johnny-joint-rebuild-kits

 

[TTCruiser]

I see Johnny Joint rebuild kits in the following link. Does anyone recall the dimensions to match up with a given kit?

https://www.polyperformance.com/34464-johnny-joint-rebuild-kits

Our links use the 2-1/2” jj

 

[TTCruiser]

The bushings I received from Trail Taylor are marked M02240. Looks like they are made by Daystar abs are only available in bulk?

Daystar bulk-m02240 bulk-m02240 - Minimum Purchase QTY 100 | DaystarSuspensionParts.com

bulk part made by Daystar | bulk-m02240 bulk-m02240 - Minimum Purchase QTY 100.

www.daystarsuspensionparts.com

So it looks like I’ll just be ordering them from Jason when they wear out again.

 

[OwnerCS]

The bushings I received from Trail Taylor are marked M02240. Looks like they are made by Daystar abs are only available in bulk?

Daystar bulk-m02240 bulk-m02240 - Minimum Purchase QTY 100 | DaystarSuspensionParts.com

bulk part made by Daystar | bulk-m02240 bulk-m02240 - Minimum Purchase QTY 100.

www.daystarsuspensionparts.com

So it looks like I’ll just be ordering them from Jason when they wear out again.

Are these the bushings for the non-Johnny Joint ends?

 

[TTCruiser]

Are these the bushings for the non-Johnny Joint ends?

Yes