Toyota Black Vinyl Wrap?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 31, 2013
Threads
111
Messages
1,543
Location
Chicago
I need to order some vinyl wrap for my FORD Econoline van and I was wondering if there is a matching vinyl wrap to the Toyota Land Cruiser Black? Someone has had to make it. Need to cover some scratches on my Bruiser on the side and hood.
 
Last edited:
I saw on a tundra forum that someone had good luck with 3m glossy black to match it to toyota 202.
 
Just one thing to mention is that there are two different black colors used on the 200 series LC - 202 in pre-'16 and 218 in 16+. 218 (attitude black/midnight black) has the blue metalflake flecks, whereas 202 is jet black.
 
Just one thing to mention is that there are two different black colors used on the 200 series LC - 202 in pre-'16 and 218 in 16+. 218 (attitude black/midnight black) has the blue metalflake flecks, whereas 202 is jet black.

I saw a post in Tundra forums that 3M 1080 glossy black matches? I'm assuming its the 202 jet black?
 
That'd be my assumption as well. I had a 2010 Tundra that was the 202 black and that was just a plain black that seems like a match to black gloss wrap.
 
Anyone wrap their land cruiser? Anything special to know?
 
Anyone wrap their land cruiser? Anything special to know?

Just did a small section. First time at it for kicks and just the lower bumper. This vinyl stuff is easy and forgiving to work with, but then I'm not trying to wrap a car with more complex curves. Heat gun to help contours, scissor, and razor.

LXwrap.webp
 
Just did a small section. First time at it for kicks and just the lower bumper. This vinyl stuff is easy and forgiving to work with, but then I'm not trying to wrap a car with more complex curves. Heat gun to help contours, scissor, and razor.

View attachment 2824691

Sort of what I was thinking, i got 3m black gloss 600sq feet for $250 enough for 6+ land cruisers. I plan on doing hood and was wondering if I will need to do all the other body panels to match. Worried that it might be too thick and need to do rest of the car to match 3mm height.

The stuff I bought doesnt require a heat gun from what I remember.
 
822073B9-AAA6-45F3-A65D-6269A990C25C.webp
I just did my grill. Kind of hard in the shaped parts but definitely doable…
 
I have a number of vehicles to do: Ford E350, 200, 100, crown vic. Got a friend coming to do this Tuesday. He thinks doing each vehicle will take 2-3 hours. I didn't think it would be that fast.
 
Last edited:
Back
Top Bottom