So first off it still pings from dead stop if I feather or lightly accelerate. Then goes away. Or if I'm moving and normal driving speed with a slight incline and I feather the gas pedal and keep it feathered the pinging continues until I move beyond the sweet spot. Would crossing vacuum tubes ca use this? It's the valve/switch thing that has the green decal or sticker on it.
To be clear, I'm unsure if I plugged the 2 tubes into the wrong ports. I know pinging is bad and can punch holes into piston heads, so you can imagine why I want the pinging to stop.
I did manage to get the old PCV valve out as well as the grommet. The hose cracked a little but I put electric tape around it to seal it the best I could for a temp fix. Should I use small radiator hose or rubber fuel line with clamps on either end?
To be clear, I'm unsure if I plugged the 2 tubes into the wrong ports. I know pinging is bad and can punch holes into piston heads, so you can imagine why I want the pinging to stop.
I did manage to get the old PCV valve out as well as the grommet. The hose cracked a little but I put electric tape around it to seal it the best I could for a temp fix. Should I use small radiator hose or rubber fuel line with clamps on either end?