I just bought a '67 FJ-40 which the motor runs strong in. However, a couple of days after I bought it the throttle linkage started to stick and I started taking it a part. Well it has been rigged up pretty good and I am looking for a new one, or a donated one. Any ideas on where to find one or how to fab one, I have access to steel so that is no problem. Just looking for Ideas.
Throttle Linkage (1 Viewer)
- Thread starter AKcruiser08
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Buy one from Mark's Offroad in Burbank.
He goes by 65swb45 here on MUD.
He goes by 65swb45 here on MUD.
- Joined
- Apr 14, 2004
- Threads
- 1,462
- Messages
- 36,599
- Location
- 818-953-9230
- Website
- www.marksoffroad.net
Thanks for the head's up Dan. AK, is your truck mechanical rod linkage, or a throttle cable? 67 is a transition year, so it could be either. If you have an F145 engine and a dash pad, you should have a cable. If you have an F135 engine and a ribbed, non-padded dash, you should have rod linkage.
I have several sets of used rod linkage, as well as throttle cables. It is also possible to convert an earlier rod linkage carb to work with a cable. There are pics of such setups on this forum if you search. I think landpimp has a cable conversion on his 1bbl carb.
Best
Mark A.
I have several sets of used rod linkage, as well as throttle cables. It is also possible to convert an earlier rod linkage carb to work with a cable. There are pics of such setups on this forum if you search. I think landpimp has a cable conversion on his 1bbl carb.
Best
Mark A.
- Thread starter
- #4
I just changed out the Carberator to a two barrel and converted the mechanical linkage to a cable linkage. Right now though I am trying to figure out the electric choke.
What carburetor and what rig?
