Does anyone know the route the throttle knob takes on an early 60s fj40?
WDYD Throttle Knob Route early 60s FJ40
- Thread starter bosco66fj40
- Start date
What did you do....
Content may include affiliate links. Please see terms for details.
The hand throttle cable goes to the carb
Found this thread for an early cruiser … kinda the same for the 60’s fj40’s as well
forum.ih8mud.com
Found this thread for an early cruiser … kinda the same for the 60’s fj40’s as well
hand throttle diagram
do any of you have a diagram or photo of how the hand throttle cable hooks up to the carburetor or throttle linkage? The PO had disconnected mine, and I just want to be sure i reconnect it properly. Thanks! Destin
forum.ih8mud.com
Here’s another…
forum.ih8mud.com
Btw later hand throttle cables went to the gas pedal … if your cable is quite short it may have been modified to go to the pedal
Hand throttle cable to '67 carb throttle lever
Getting the original single barrel carb going- after 10 minutes of rough acceleration it's now running great. Trying to figure out how the hand throttle cable attaches to the throttle lever. The last tidbit in the box of parts is a cable connector (shown in my hand) that is a little different...
forum.ih8mud.com
Btw later hand throttle cables went to the gas pedal … if your cable is quite short it may have been modified to go to the pedal
YES ,
it goes STRAIGHT through the firewall inline with the D-GROOVE hole in the main outer , inside CAB metal dash switch panel
you Deveite from this path you will NOT get it routed correctly ...
- Thread starter
- #5
Thanks!
Last edited:
- Thread starter
- #6
I found the image that shows how it attaches to the carb.Here’s another…
Hand throttle cable to '67 carb throttle lever
Getting the original single barrel carb going- after 10 minutes of rough acceleration it's now running great. Trying to figure out how the hand throttle cable attaches to the throttle lever. The last tidbit in the box of parts is a cable connector (shown in my hand) that is a little different...
Btw later hand throttle cables went to the gas pedal … if your cable is quite short it may have been modified to go to the pedal
On a RHD early 40 the choke and throttle are next to each other. The choke, throttle and temperature sender wire all come through this grommet on the firewall and attach as stated above -
