Techstream ABS solenoid bleed (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 3, 2013
Threads
13
Messages
47
Location
South West Western Australia
I am at my wits end with Techstream as far as bleeding the ABS is concerned.

My version of Techstream give no instructions at all as to how the procedure is carried out, and the w/shop manual is very short on detail, so I need so advice from someone who has used a similar version please.

When I get to the section where T.S. opens the solenoids, all I get is two boxes, SA1 & SA2 and the choice to check 1 or 2 or both.
There is no indication as to which solenoid is related to which side of the car, or which side to activate first if choosing to do only one at a time.

Also, the instructions in the W.S. manual do not mention if the bleed nipple should be open before operating a solenoid, or any other procedural details, like is the brake pedal down or up at this point.

I have trolled through literally hundreds of pages on forums and watched dozens of videos on the subject, but they all seem to be about versions of T.S. that actually have on-screen prompts & instructions, like FL FR RL RR and automatic timing for the solenoids etc. etc.

Any help offered would be greatly appreciated. Cheers
 

Users who are viewing this thread

Back
Top Bottom