Tach and Speeometer for conversion..... (1 Viewer)

[sebo4wd]

Hey guys,
I've got a FJ62 with a 350 and 700-R4 conversion. I've already changed out my voltmeter, water temp, oil pressure, and fuel level gauges and done away with the stock ones. I am trying to figure out how to install the tach and speedometer. Can anybody help or has anybody been in the same situation??? Thanks,
Sebo4wd

 

[TheGr8Doughboy]

You can run the stock tach right off the 350 with a minor mod, resistor inline. Search for a post wagoneer? started on stock tachs. I ran mine with a 200Ohm resistor and it's with in 100RPM at 3000.

Chris

 

[VETTE60]

i took out the old tach and replaced it with a small aftermarket tach that fits into the stock space (a little tight). all of the other stock gauges were retained and adapted.