TAC Garage Sale 2020 (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

SOLD 2000 Toyota Land Cruiser 4x4 SUV. Lets start with the good, Originally an Oklahoma Truck so the underside and body are pretty much rust free, Center Lockers and all the standard Lexus/Landcruiser options. The Bad, It runs like crap The guy that traded it in says it needed knock sensors, it is throwing 13 codes P0300 P0301 P0302 P0303, C0200 C0205 C0278 C1207 C1223 C1241 C1252 C1256 C1340 The battery is dead and will most likely need to be replaced. The interior is in fair shape except for the drives seat. The wheels are off a Toyota Tundra The tires are pretty new and in great shape. Lots of records with it. The guy that traded it in said he had the timing belt done at 210000 but there is no receipt so I'm sure it needs to be done again. Would make a great Overland rig! Asking 3750.00
SAM_2007.JPG
SAM_2008.JPG
SAM_2009.JPG
SAM_2014.JPG
 
Last edited:
Found a couple of OEM Toyota wiring pigtails. FREE to whoever wants them.

flat four trailer wire
AC2D053B-B400-4D75-9020-1641B3602456.jpeg
3040BDF9-6E33-4F97-9754-44E2DF53A6CD.jpeg


Trailer brake wiring for 4Runner or Land Cruiser 03-20? Part number 82132-60110
C9B78ABD-41BC-4FCF-ABF4-E878260E38C1.jpeg
9B51EA99-97B4-4E44-8986-325AC2BA68FD.jpeg
 
I would but only need the flat four and pretty sure I have a spare for chefs truck in the garage. @CrowleyFJ40 might need them tho.
 
I would but only need the flat four and pretty sure I have a spare for chefs truck in the garage. @CrowleyFJ40 might need them tho.
Nope, I've got flat 4 on the 40 and 85 4runner, 7 pin on everything else. Well, Chewie needs a new 7 pin, Moab claimed that one...
 
Rebuilt sm420 and rebuilt early t case
$250 obo

Two decent sm420 that would rebuild well
$free u haul

Two sm420 to transfer case adapter plates
$50? Each obo

I just would like this stuff to go get used.

I also have the F motor bell house you’d need to bolt the 420 to.
Also $free

I still have a 420/Orion in my fj40.
It’s a killer off road setup, but the splits are wide on the street.
Therefore I’m going back to a “stock” Aussie H41 with a 5 to 1 first gear vs 7 to 1, but also I’m pretty well done with the harder core off road stuff I used to do

3A98939D-D2BE-43F7-8337-9F4C2E3190D3.jpeg


722C33AD-F2BB-4185-8087-E27B4F5A2281.jpeg


255448B7-1615-42D2-BB7F-AC531F84B94D.jpeg


4C5F4AA5-BDA1-45EE-9AD4-4FF35F9C79BC.jpeg
 
Last edited:
I can deliver these bits from Chefs to KC if needed. but someone has to get them out of the parts hauler prius upon arrival in KC. kills my gas mileage hauling stuff like that!
 
I have some stuff for sale that is collecting too much dust in my basement.

Rare OEM hand throttle kit for 84-88 trucks, 84-89 4runners. Was on my 85 diesel. $125

6 Vintage Con-ferr roof rack brackets, NIB removed for photos $150

Air locker solenoid and Carling switch $10

7” round headlight guards, no clips - free

Oil filter for F or 2F - free

Rear heater coolant hose guard, I think from an ‘82 40 series. - free

CB external speaker and mic - free

3A61243A-12AC-4551-A73B-14416919E7A1.jpeg
5F536E5D-5463-4B9A-B87F-54BC70669415.jpeg
FA8D11C4-78E1-4909-8A44-F3D362774043.jpeg
3918F11A-C197-4B79-9090-8390360E382A.jpeg
95A68A9E-7E5D-4534-961D-CFB7144948DB.jpeg
 
Colin. Grab those headlight shields for my yard art winter project. I had those on my first fj40! Thanks Alex!
 
@toyotology - I will take that arb switch and solenoid.
 
Free to bad home. Or good

CE17ED2E-C316-49FE-92DE-816B1D84B799.jpeg


2C93FD7A-BEF2-4284-8D22-EAB2F767B7A3.jpeg
 
Sure everyone has seen, but if not, I'm selling my ARB rooftop tent for $800. I think $800 is a reasonable price 🤷‍♂️, but ill also take an offer from club members. Please see post below:

 
Free. 55 gallon bags of oak wood chips perfect for soaking up oil spills.

6884CF1F-643D-4CCF-9B04-913A764C592D.jpeg


image.jpg
 
I have five 80 series wheels (shank style lug nuts) that I’d like to sell for $300. They’ve been bead blasted and just had the tires removed so they are ready for new rubbers. I’ll look, but I don’t think I ever had center caps (not a fan, so always went sans caps).

1F559B2F-896A-4ED0-8E38-802759071E22.jpeg


34982D76-EE92-4A98-882A-D5123AB29E0E.jpeg
 
Any interest in a wood 40 series light bezel? I have been wanting a real one for decoration but then I just drew one from what little dimension info I could find on the internet and cut them out with an older CNC. I have made 5 so far, the machine leaves them a little rough. $100 each, Blue Springs, 816-835-0586
IMG_8697.jpg

IMG_8693.jpg

IMG_8695.jpg
 

Users who are viewing this thread

Back
Top Bottom