I adjusted my steering freeplay as the FSM says. Loosen locknut on steering gear box and tighten the adjusting screw. It worked great!
However, I might have very slightly overtightened the screw as I have under ~25 mm of steering wheel freeplay. Is there anything wrong with this. Is the gear box forgiving if I slightly overtighten the steering? So far, the turning seems fine, no rough spots etc.
I really like the steering. It's like driving a new truck. Before the adjustment, I could turn the steering wheel more than a 1/4 turn before the wheels would engage.
Any thoughts.
However, I might have very slightly overtightened the screw as I have under ~25 mm of steering wheel freeplay. Is there anything wrong with this. Is the gear box forgiving if I slightly overtighten the steering? So far, the turning seems fine, no rough spots etc.
I really like the steering. It's like driving a new truck. Before the adjustment, I could turn the steering wheel more than a 1/4 turn before the wheels would engage.
Any thoughts.