Stainless Steel Braided Clutch Hose

shipmag

Hagler Technology LLC. Aka Shipmag
Joined
Jul 1, 2012
Messages
1,622
Location
Cape Girardeau Missouri
For those interested I am looking at developing a Stainless Steel Braided hose. The construction will be the same quality as my Transmission Transfer Case Bypass hoses.

My hose vendor has the male and female M10 fittings. He does not have the M11 threads. If there is a large enough request I can get them made. The M10 female fitting would not have the groove in the fitting to be able to use the oem clip holding it tightly in the existing bracket. We may be able to use a press on clip.

I do not have a landcruiser with me. So I would need some help getting the hose design that would be except-able to all. After all this is how we originally developed the bypass hoses for the FJ60 was other mudders helping with the design.
 

Pighead

Stop calling it an FJ
Joined
Aug 31, 2004
Messages
9,255
Location
Camino
Braided stainless steel clutch hose?
Thanks but i already have one.
Plus, mines for a 55. 40s are probably different.
IIRC, hose ends were the same as brake lines

20221118_131133.jpg


20221118_131152.jpg
 

Users who are viewing this thread

Top Bottom