Spokane Picture Thread

[HoboFire]

Hey guys, just thought to make a thread with pictures of our rigs so we know who's driving around this town.

Here's me...

and one of where it's at now...

 

['69 Yota]

Here's mine.

 

[tonkota]

This is our FJ62 and the FJ55 (not drivable):

1989FJ62

1973 FJ55

 

[SpokaneLX470]

Hi there... here is my baby. She's got her summer shoes on here, currently running snows with factory mags powdercoated to match the paint.

and my baby

 

[bigndn]

My little '40....

This is me......

 

[Spook50]

Hey great idea. Here's mine at the top of Mt. Pilchuck in '06. Only thing different now is my PIAA fog lights are reinstalled on the bumper and I've got the Aussie sliding cargo windows.

 

[bigndn]

^^^^^^^^^^^^^^
Nice looking 62, Dan!!!!!!

 

[Tanker120]

Let see if i got this, if it worked you will see my 75, pic was taken in the fall, and it is in the garage now and put on hold while I work on my 74

I will eventually get a pic up of the 74, but nothing to take a pic of as of yet- it is completely disassembled and getting ready to have the frame Hot Dip galvanized at Airway heights next month. I will start a build up thread once it is back and I start assembly. Hopefully I can do that on this local thread. Lots of parts have been individually restored and I have taken lots of pics of each some with before and after shots. I may be looking for parts Has the reassembly goes, I got the 74 in pieces-the reason not to start on the 75- I can use it as a reference!

I hope to have it on the road, by end of summer, but lots of trips planned away from home so may not make it

 

[foxtrot4elk]

Got a few pix loaded on new puter so heres mine,the tranny out in the 2nd one was due to camshaft expansion plug leaking oil a lot of work to fix an oil leak! Had to throw in an elk hauling pic too! I have plenty more of those but not on the computer yet! Anyway the 60 is an 84,rebuilt 2f, stock 4speed, 4:88 gears, arb lockers front & rear, ome heavy rear,iron man heavy front, pro comp x terrain tires 35" leather seats from an altima.
warn 8274. currently replacing rust on inside so I can finish the interior, then I'll start on outside- rust,paint,bumpers.

 

[bigndn]

Let see if i got this, if it worked you will see my 75, pic was taken in the fall, and it is in the garage now and put on hold while I work on my 74

I will eventually get a pic up of the 74, but nothing to take a pic of as of yet- it is completely disassembled and getting ready to have the frame Hot Dip galvanized at Airway heights next month. I will start a build up thread once it is back and I start assembly. Hopefully I can do that on this local thread. Lots of parts have been individually restored and I have taken lots of pics of each some with before and after shots. I may be looking for parts Has the reassembly goes, I got the 74 in pieces-the reason not to start on the 75- I can use it as a reference!

I hope to have it on the road, by end of summer, but lots of trips planned away from home so may not make it

Is your green one driveable? I've been seeing one similar in Sandpoint. Also, if you need a flatbed trailer to get your frame over to Spokompton, let me know. I have a 24' flatbed and a M105 (9' X 6') if you need.

 

[Tanker120]

Is your green one driveable? I've been seeing one similar in Sandpoint. Also, if you need a flatbed trailer to get your frame over to Spokompton, let me know. I have a 24' flatbed and a M105 (9' X 6') if you need.

No it is not driveable, and it did originate from up North but hasn't been on the road in over a year but it did run good and no leaks while sitting in the garage

Thanks for the offer on the flat bed, if I need one to move it I will let you know, I am hoping it will fit in my Truck with a little stickout, I also have a small 8' trailer if that does not work i will be PMing you!

 

[sessions]

Here's my 85' 60 that gets around town...rockin' the oregon plates..

 

[Dirtsquirt]

Hiya!

Mine still looks like this with a few changes.
It wont be wheelable for some time.
Bout all I can use it for is short trips to the store.
What a Hunk O Junk

 

[My71FJ40]

Howdy

Yep, here is mine. Top is off all summer long, but will be forced to put hard top back on sometime in the fall I usually drive it to work every friday, and around town here and there. Just got my new fuel pump so will be putting it in before the weekend.

 

[climber8483]

I saw you yesterday driving down Francis. Your engine sounds too quiet to be a 1f.

 

[My71FJ40]

I saw you yesterday driving down Francis. Your engine sounds too quiet to be a 1f.

Ya know, I did my research on what year my motor is if its original to my cruiser or not and if its a 1F or 2F. The # on the block says F 399497 and according to the info on SOR it appears I have somewhere in the neighborhood of a 6/72 engine, a 1F. I know some PO has installed front disc brakes, put the 3 speed on the floor and did away with the vacuum for transfer case. Also seems to have some home made shackles...have to take some pics and put them on my build thread...they are butcher work, but they do work...I will eventually swap them out with new ones and bushings. I am having to much fun driving it around this summer to park it and do some overhauling, that will have to wait until this winter

 

[tonkota]

Newest 2F-E wagon picture

Loaded for camping with the two extra leafs in the back:
2F-E wagon


She rode pretty good and handled nice for the trip. I could hold 65 up most hills (except for Chewelah hill, that's a bitch even unloaded ). I'm thankful that I installed those two leafs. It's about right I think.

 

[motosteve]

Mean Green

Here's my Green 78 after I painted it and before. Have added a MAF tire carrier See you around!

BTW.... still looking for a t-case off a 3-spd


Steve

 

[bigndn]

^^^^^^^^^^^
Nice! Where's the cruiser rally at?

 

[bwr9300]

My new prize and could use some tips of spokane area... I've just been playin out at ORV park since I got'er 2 weeks ago.