Split ring needed (not the behind the knuckle) (1 Viewer)

[mochosla]

Hi guys. I was taking out the CV joint to grease it before I put the knuckle back together the small internal stainless steal split ring that goes at the end of the shaft came out in pieces. Do you know where I can buy it? All the regular auto parts stores I went to do not carry them.

Thank you.

 

[Kleatus]

I've got them from @cruiseroutfit (Cruiser Outfitters) before. The ones inside the birfield joint break when you separate it so they are replaced out of necessity when you dissassemble fully to clean and repack.

 

[OSS]

Snap ring can be ordered from any Toyota dealer. Won't be in immediate stock.
Only use the Toyota snap ring. Not something you find at a hardware store.

Toyota PN: 90520-27091
(43411C on drawing)

90520-28036
(43411B on drawing)

 

[mochosla]

A

Snap ring can be ordered from any Toyota dealer. Won't be in immediate stock.
Only use the Toyota snap ring. Not something you find at a hardware store.

Toyota PN: 90520-27091
(43411C on drawing)

90520-28036
(43411B on drawing)

View attachment 1538864

Awesome! Thank you very much.

 

[mochosla]

So I went ahead and called Cruiser Brothers who I bought the Knuckle kit from and they immediately told me they would send me one free of charge! Awesome service. I also called my local Toyota dealer and they needed to order it.

 

[wardharris]

So I went ahead and called Cruiser Brothers who I bought the Knuckle kit from and they immediately told me they would send me one free of charge! Awesome service. I also called my local Toyota dealer and they needed to order it.

Good call!!!!

Thanks