Well i finished doing both output seals on the Transfer case (79 Fj40 one piece) and rebuilt the park brake hub... tried to be so careful about keeping thing clean on reassemble (to reduce the chance of leaks). back together and running now. first drive, all good. only about 15min and then now at about 20km/h and 'mostly' all the time i'm getting a tick about every 2sec and a jump on the speedo needle when the tick happens... odometer stops rotating as well. which i assume is why it is ticking but not always.
when i reassembled the park brake housing can i mess up the speedo end of the cable that goes into the speedo gauge itself? i never even considered that.
when i reassembled the park brake housing can i mess up the speedo end of the cable that goes into the speedo gauge itself? i never even considered that.