Spacer question for 2004 100 (1 Viewer)

[joey.w]

Morning all. My 04 100 has a Dobson 1.5 lift with some BF Goodrich LT275 70R18‘s. They sit a little to “under the fender” Any recommendations on what spacers I can use to bump them out a bit?
Many Thanks!
JK

 

[kwon-offroad]

This has been discussed ad nauseam. Do a search. Most seem to do a 1.25” Spidertrax but I went with 1” Bora due to slightly too much poke with the spidertrax. Any spacer needs a special bore to go over the front hubs. Just make sure you tell whichever vendor you decide your model truck and they’ll ensure fitment.

I run stock wheels on my ‘06.

 

[Trunk Monkey]

Search "spacers", titles only, 100 section only, lots of threads to browse. Spidertrax, Slee, Bora are the most common brands here.

 

[joey.w]

This has been discussed ad nauseam. Do a search. Most seem to do a 1.25” Spidertrax but I went with 1” Bora due to slightly too much poke with the spidertrax. Any spacer needs a special bore to go over the front hubs. Just make sure you tell whichever vendor you decide your model truck and they’ll ensure fitment.

I run stock wheels on my ‘06.

Many thanks!

 

[joey.w]

Search "spacers", titles only, 100 section only, lots of threads to browse. Spidertrax, Slee, Bora are the most common brands here.

Much thanks!